WTB. I have need of a Lyman 429360 double cavity mould that cast a 232 grain bullet.

I also need a Lyman 429422 hollow base double cavity mould that cast a 235 grain bullet.

Both of these moulds are of the Keith's style blunt meplat nose, in fact he designed them.

Thanks, Jim :)

WTB. I have need of a Lyman 429360 double cavity mould that cast a 232 grain bullet.
Thanks, Jim :)

Jim-
The 429360 is not a Keith design, but is by Boser I think. I have a new ( in box and stuck together with the old Lyman preservative ) single cavity hollow point mold that does not have the hollow point pin. The hollow point hole in the mold appears to be misaligned but would clean up to a larger size very easily. If your interesed! I don't visit the web on weekends, only during the week.

45 2.1, Yes, thank you. I would be interested in your single cavity mould...because its a hollow base.

If you will contact me by PM (private message) we can discuss it there as to my email addy and any further transaction on the mould.

Thank you, Jim

Have you searched e-bay? I have bought many moulds and reloading tools from e-bay.

Luck is with me tonight. I just won an ebay auction that netted me a Lyman #429360 two cavity 232 grain bullet mould that has seen very little use...price $27.79 whoopie!

I've acquired a lot of moulds and reloading equipment from ole ebay too.


Jimhttp://i24.ebayimg.com/03/i/01/8e/83/ea_1_b.JPG

So you are the one I've been bidding against!!!

So you are the one I've been bidding against!!!
Bigfoot, there was only 3 bids, mine was the third one...heh heh. :D