I recently purched a bench rifle in a 6mm BR .115 short with a .262 neck. I can not seem to find any case dimensions or loading dies to form the brass. I do have 50 rounds of brass for the gun but lack the ability to make any more.

Mike,

There are two things I would do. First is cast the chamber to verify the version you have is relly the short neck. Second would be send one of the fired cases you have, along with the cast, to RCBS or Redding to have a set of dies made for your specific chamber. There isn't much point in having a rifle with the intended accuracy potential this one should have and then trying to make do with off-the-shelf dies.

Even though I have worked for RCBS in the distant past my first choice would be redding in this case.