View Full Version : reloading the 50 alaska
I am looking for reloading data for the 50 alaska I am trying to get *between 2050 and2100 fps with a 475 beartooth bullet. I have been using IMR 4198, but would like to use RELOADER#7or H322.Any information on this would be great
RugerNo3
04-10-2001, 12:17 AM
kev, you have a post in Rifle and Rifle Cartridges that was answered with Re7. Loadswap has some as well for the contender, but a place to start.
Big Bore
04-11-2001, 12:36 PM
CORRECTION: The .50 AK load data is for the ENCORE, NOT the Contender. For more reloading data for rifle loads you can find a bit in "Cartridges of the World" Vol. 9, but they don't have any for Re #7. In "Wildcat Cartridges" Vol II they have considerably more data and also a lot with Re. #7.
kevin
08-22-2001, 05:16 PM
I have been shooting the 50AK for some time now. I've tried several powders.I had good luck with IMR4198,and now using H322.I now have information of people using benchmark powder with a 525 gas check bullet and getting,2000fps. And that is something else,but I have check it out and called serveral people and have the grains to start with. I will use this information and will up data if it works out.If so I think the 50AK will be the round for anything on this earth at a middle range.
vBulletin® v3.6.8, Copyright ©2000-2008, Jelsoft Enterprises Ltd.