HEY! ANYBODY OUT THERE HAVE ANY WORKING SCHEMATICS FOR AN OLD J C HIGGINS BOLT ACTION SHOTGUN?<!--emo&???--><img src="http://beartoothbullets.com/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'><!--endemo--> MODEL #583.22 20 GA. &nbsp; ALSO TIPS ON PLUGGING TUBE MAGAZINE HELPFUL!

Hi, Jethro:
* I can't help you with a schematic, but most old pump guns used a wood dowell that fits inside the magazine spring. About 3/8&quot; works well. You don't want a tube diameter dowell that compresses the spring when the magazine is empty. Cut the dowell a bit long and try it, then shorten as necessary.
As my old blacksmith said, &quot;Cut it off twice and it was still too short&quot;. <!--emo&:)--><img src="http://beartoothbullets.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'><!--endemo-->

Bye
Jack

(Edited by Jack Monteith at 10:34 pm on Jan. 18, 2002)

Jethro,

Check Numrich &lt;http://www.gunpartscorp.com/&gt; they have schematics for hundreds of firearms ....seems to me ū per set.

Lobo in NM

http://www.gunpartscorp.com/

Gentlemen,

Sorry to have been absent here, but have been working non-stop on lots of fronts. &nbsp;Bullets being the foremost, and this website the second. &nbsp;One of the features you'll find go online with the new website tomorrow, is a remake of GuNuts! &nbsp;It will be totally interactive, much like LoadSwap.com, where you can add schematics and exploded view drawings of firearms from a very simply interfaced control panel. &nbsp;It won't have any member mumbo-jumbo, and uploading a scanned image will be quick, easy and hassle free, for situations just like this where someone needs a schematic, chances are someone else will too, at a later time. &nbsp;This will provide for an ever increasing and more comprehensive resource for everyone. &nbsp;We think you'll like the changes!

Better go make a bullet!

God Bless,

Marshall