After taking my Encore out last year I took the break mechanism off the gun by removing the stock and pin that goes past the trigger. After putting the gun back together it is now harder to pull the break open and it feels scratchy. Everything is totally cleaned and lubes with silicone spray. I have taken it apart and put it back together several times but the problem has not relieved itself. Anyone know what I may have done? It still works fine just not the way it did before I took it apart. I just had to mess with it - Help me please! Mean

After taking my Encore out last year I took the break mechanism off the gun by removing the stock and pin that goes past the trigger. After putting the gun back together it is now harder to pull the break open and it feels scratchy. Everything is totally cleaned and lubes with silicone spray. I have taken it apart and put it back together several times but the problem has not relieved itself. Anyone know what I may have done? It still works fine just not the way it did before I took it apart. I just had to mess with it - Help me please! Mean
Why don't you contact T/C, they have a great customer service operation, they will fix you right up with what to do, heres their number, 603-332-2394.

This problem has been discussed here before and the fix for it. I'm not sure if it was in the tips section or on the forum. You might do a search and see if you can find it.