I just recently got a Winchester Model 150 from a relative. I have been looking at it and can't seem to figure out how to take the barrel off. Anyone with and idea? Thanks

Welcome to the forum 32s8ecso. Rules are simple, be nice and join in.

Have you checked the GunNuts section at the top of the page. It might be in there. If not check out gunparts.com

I just checked the GunNuts section and the 150 wasn't in there, sorry.

Here's a link for an outfit that sells reproduction factory manuals for six bucks each for the Win 150. Hope that helps you out some. Another avenue is to get a dissembly book available at most gun shops or thru book stores. Probably Brownells also. Be sure your model is in the book, there's several different books.

www.rediscovered-shooting-treasures.com/winchester150.htm

Iowaloha 32s8ecso,
I have a Winchester 150 and a owners manual. The manual does have an exploded view. That alone will not show you how to remove the barrel.
Alluminum reciever and a steel barrel is not something to mess with without good reason. I have had my 150 since the sixtys' and have found no reason to. I clean careful from the muzzle. A Bore Snake would be another good way.
Cheezywan