PDA

View Full Version : What are the most common broken parts on a Marlin 336?

claykuch
10-06-2006, 09:39 PM
I want to keep some spare parts for my 336. What are the most common broken parts on a Marlin 336?

Clayton
VTDW
10-07-2006, 01:31 AM
I haven't had it happen yet but the ejector spring is one I would want to have as an extra.

Dave :cool:
imashooter2
10-07-2006, 06:47 AM
The fwd firing pin, the firing pin spring and both firing pin retaining pins. Also the ejector as mentioned above and the extractor.
pisgah
10-07-2006, 08:22 AM
The fwd firing pin, the firing pin spring and both firing pin retaining pins. Also the ejector as mentioned above and the extractor.


In all the 336s I've owned over many years, the only breakage I've had was one ejector spring. Based purely upon an idea of what I might theoretically need, I keep the same spare parts kit as you.
ribbonstone
10-07-2006, 08:28 AM
The fwd firing pin, the firing pin spring and both firing pin retaining pins. Also the ejector as mentioned above and the extractor.
Add in a set of screws...either they loosen and fall out, or get so jammed over the years they get buggered when taken out.

Other things can break or be busted...dented mag. tubes, loading gates that suddenly refuse to gate...lifters that won't lift...even if used as a single shot, the rifle will work until yu get it fixed.

Without the extractor/ejctor/figning pin, it's a stick..