I posted a much longer piece under handguns but thought this might be of intrest to some of the rifle shooters. Here is the clip:

Using Beartooth 425 grain Pile Driver Juniors on top of 52.5 grains of Hodgdon Benchmark I shot a five shot group at 100 yards that measured 2.4 inches with a velocity of 1618 fps as measured by my Oehler 35. The standard deviation was 5. This was shot from a bench with a two power scope.

Any information in this article is for information only. The loads mentioned here have not been pressure tested and are not to be construed as safe in any firearm but mine.

I'm curious what gun you shot it out of. That bullet is almost my very favorite for that caliber.

Grizz

In 45-70? Bandito

I should ahve added a little more to this at the beginning. This is out of a Magnum Reasearch BFR in 45-70. It has a 10 inch barrel. I would be pleased with this accuracy out of a lot of rifles. As you can imagine I am very pleased with it out of a revolver. I certainly have to give lots of credit to Marshall's bullets and his ability to size them to the customers particular needs.

John