Hi All!

A friend has a Ruger PC4 carbine in 40SW, and the trigger is by far the worst I've even seen on a production gun. It has to be 20+ pounds. Anyone know of a cure, or somewhere I can find a schematic of the trigger group, so I can tear it down and polish it?

Thanks!

Papajohn

Hay papajohn

There should be a schematic in the directions that came with the gun. If you don't have those you can get a manual online from Ruger for almost any gun they sell or have sold.

Numrich arms also has schematics along with Brownell's I believe.