Hello, All

I am new to the boards and was wondering if anyone had an idea on where to get the parts and whats parts to get to convert the ammomaster press to progessive. Any information on this would sure help.
Thank you
John

Welcome to the forum John. Rules are simple, be nice and join in.

I'd give RCBS a call, they are very good to deal with.

Thank you, I contacted RCBS and they said they dont sell the progressive kit anymore. So I'm at a loss right now. I need to find these asap, so I'll keep looking.
Thank you
John

They don't sell the Ammomaster progressive press anymore, but they still sell all the parts. Shell plate carrier, tool heads, etc; Would probably cost as much to do it piece meal as buying a progressive press.

Hi John,

I am new here too. I have a ammomaster progressive and a piggy back. You are doing just he opposite of what I am doing. I am building the stuff to change from the ammomaster to the single stage. The top plate is pretty easy but I will buy the conversion shellplate adapter.

Anyway, getting to your question. If you really want to do this, buy a piggyback as most those parts are the same. You will need to get some parts from RCBS but they may just give them to you for the asking. Here is the link for the ammomaster progressive instruction manual: http://www.rcbs.com/downloads/instructions/AmmoMasterAutoProgressiveReloadingPressInstruction s.pdf and here is the instruction manual for the single stage : http://www.rcbs.com/downloads/instructions/AmmoMaster_Single-Stage_Reloading_Press_Instructions.pdf here is the instructions for the piggyback :http://www.rcbs.com/downloads/instructions/PiggyBack_Conversion_Unit_Instructions.pdf and here is the instructions for converting the single to the auto: http://www.rcbs.com/downloads/instructions/AmmoMaster_Single-To-Auto_Conversion_Instructions.pdf

By comparing the parts list of all you should be able to figure it out and make it work.

If you are interested in selling the top plate and shellholder adapter, please contact me.

Good luck,

Robert