Hi All,

Who can tell me how to access this list???

Charles Hamiltons Yahoo list: CB-L

Okay....what can I say....I'm old and I've inhaled too much chalk dust over the years!!

Lobo in the Mountains of West Virginia

Go to the Tahoo Groups home page.
Establish an account.
Go to the goup home page and click on join the group.
You will have the option of no e-mails or daily digest or individual e-mails. Take the daily digest.

You will moderated to start with and this will have a slight delay in your posts appearing.
Be sure to search the sight for topics whic interest you as they have discussed most subjects.
Check out the files as there is a lot of cB information there.

I also suggest CB-Book. You will spend many hours tudying the different files in CB-Book.

http://sports.groups.yahoo.com/group/CB-BOOK/

I assume you are here too.

http://www.castbulletassoc.org/forum/

I assume you are here too.


http://www.castbulletassoc.org/forum/

Mr. Iorg,

Really, I'm not much of anywhere. :-) My wife and I are both hermits, and in view of what's happening in Washington, DC, we're trying to simplify life, and increase our self-reliance.

I do thank you for your help. I was reading another thread today about heavy handloaded 45 Colt rounds in rifles. I noted your contribution there also.

Lobo in the Mountains of West Virginia

While we are all worried I believe these things run in cycles. We all need to stick together and remember there are actually more of us than them. The hard part is we all need to vote.

John Kort and Marlin collector were way out in front of me on that thread.

Are you looking at the 45 Colt with heavy bullets?

By the way, while I am not from there I happen to know that in WEst Virginia and Virginia, you are not alone...

Mr. Iorg,

I have some of Marshall's 280 grain 45 cal "Sledgehammers" for the 45 Colt, and a mould that throws a 315 WFN also for the 45 Colt that I have intended to load for a Puma 92 in that caliber. From some of my recent reading, these bullets may be too small in diameter for this rifle!! :( Depending of circumstances, I could use the 280's in my Ruger Blackhawk revolver, and lap out the mould. I'll need to get into the loading bench and see about the chamber and throat on the rifle!! :p

Lobo in West Virginia