This is the first inaugral thread I've ever had the priviledge of!

Anyhow, I picked up one of these recently. I was surprised at how well it shot. Now, I've got it all but completlely broken down for cleaning and some re-hab.

Do any of you have any idea how to release the barrel/cylinder assy. from the frame? I'm thinking that the pivot pin should be one-piece from the portion jutting out the front all the way back to a point above the trigger. That's the only think I'm stumped with.

This looks like a possibility.

http://www.savage99.com/data_sheets.htm

Bye
Jack

This is the first inaugral thread I've ever had the priviledge of!

Anyhow, I picked up one of these recently. I was surprised at how well it shot. Now, I've got it all but completlely broken down for cleaning and some re-hab.

Do any of you have any idea how to release the barrel/cylinder assy. from the frame? I'm thinking that the pivot pin should be one-piece from the portion jutting out the front all the way back to a point above the trigger. That's the only think I'm stumped with.


There is a good assembly breakdown in the N.R.A. book Firearms Assembly #4 on pages 196-197. I hope this helps.

Leon